Lumbosacral spine MRI

• A
• B
• C
• D
• E
• F
• G
• H
• I
• J
• K
• L
• M
• N
• O
• P
• Q
• R
• S
• T
• U
• V
• W
• X

Lumbar vertebrae

MRI scans

A lumbosacral spine MRI uses powerful magnets and radio waves to create pictures of the structures that make up the spine, the spinal cord, and the spaces between the vertebrae, through which the nerves travel.

Conventional radiography and computed tomographic (CT) imaging use potentially harmful radiation (x-rays) that passes through a patient to generate images. Magnetic resonance imaging (MRI) is based on the magnetic properties of atoms, and there is no exposure to the same type of radiation used in x-rays and CT scans.

A powerful magnet generates a magnetic field roughly 10,000 times stronger than the Earth's. A very small percentage of hydrogen atoms within the body will align with this field. Radio wave pulses are broadcast towards the aligned hydrogen atoms in tissues of interest, returning a signal of their own. The slight differences of those signals from different tissues enables MRI to tell the difference between various organs, and potentially, provide contrast between benign and malignant tissue.

Any imaging angle, or "slice", can be projected, and then stored in a computer or printed on film. MRI can easily be performed through clothing and bones. However, certain types of metal in or around the area of interest can cause significant errors in the reconstructed images.

NMR - lumbosacral spine; Magnetic resonance imaging - lumbosacral spine; Nuclear magnetic resonance - lumbosacral spine; MRI of lumbosacral spine

Since MRI makes use of radio waves very close in frequency to those of ordinary FM radio stations, the scanner must be located within a specially shielded room to avoid outside interference. The patient will be asked to lie on a narrow table that slides into a large, tunnel-like tube within the scanner.

If contrast dye is used, it will be injected into a small vein of the hand or forearm. A technologist will operate the machine and observe you during the entire study from an adjacent room.

Several sets of images are usually required, each taking from 2 to 15 minutes. Depending on the sequences performed and the possibility of the need for a contrast dye, a complete scan may take up to a hour or more. Newer scanners with more powerful magnets, updated software, and advanced sequences may complete the process in less time.